The 64B table saw, with left tilt arbor, offers 1 3/4 horsepower in dual voltage to meet the demands of the professional contractor. The transparent blade guard has independent leaves and the quick release riving knife reduces chance of kickback. A low profile riving knife is included for non-through cuts. An arbor lock is accessed from above the table, eliminating the need for dual blade wrenches. The T-slot miter gauge has rack-and-pinion angle setting, positive stops and extension plate for expanded workpiece support. The 64B has cast iron table and wings with front edge bevel and the working area is further expanded by the melamine-surfaced wood extension table. The exclusive Accu-Fence system is available in 30 inch or 50 inch rip cut capacity. Storage hooks on the stand keep your accessories within reach.
WARNING: Proposition 65 Warning for California Residents View Details
Manufacturer | Powermatic |
---|---|
Condition | New |
UPC | 31325184563 |
Features |
|
PDFs | |
Horsepower | 1.75 HP |
Motor Phase | 1 Ph |
Size (Inch) | 10" |
Stationary type | Contractor |
Motor Current | 15/7.5 Amps |
---|---|
Motor Voltage | 115/230 V |
Prewired Voltage | 115 V |
Recommended Circuit Size | 20 Amps |
Dust Port Outside Diameter | 4" |
Dust Collection Minimum CFM Required (CFM) | 350 CFM |
Table T-Slot | 3/4" x 3/8" |
Table Size with Full Extensions | 79 5/8" x 27" |
Table Size with Extensions | 44 1/4" x 27" |
Table Size | 20 1/8" x 27" |
Table Height from Floor | 36" |
Table Type | Cast Iron |
Maximum Rip Left of Blade | 12" |
Maximum Rip Right of Blade | 50" |
Table in Front of Saw Blade at Maximum Depth of Cut | 11 1/2" |
Maximum Width of Dado | 13/16" |
Maximum Diameter of Dado | 8" |
Maximum Depth of Cut at 45 Deg | 2 1/8" |
Maximum Depth of Cut at 90 Deg | 3 1/8" |
Arbor Speed (RPM) | 3,800 RPM |
Arbor Diameter | 5/8" |
Related Products
Check items to add to the cart or