Join Our Mailing List!

* required

*

*




Email Marketing by VerticalResponse

 Burns Tools BBB Business Review

J-1100R-4 4" Arm Radial Drill Press, 3HP, 460V



Bookmark and Share

$19499.00
Add Item to Your Shopping Cart

Jet 320035 - J-1100R-4 4" Arm Radial Drill Press, 3HP, 460V

Get FREE SHIPPING on Jet orders over $999!
*Free Shipping applied to orders shipped within the Contiguous USA. We will also pay the cost of residential delivery and lift gate, if necessary! Specify at checkout, or call us today!

Drill Press, Direct drive, Jet, 460 V, 2-1/4 Inch Drilling Capacity Cast Iron, 1-3/4 Inch Drilling Capacity Mild Steel Drilling Capacity, 24 3/4 X 20 1/2 X 16 1/2 Inch Table, 1-1/2 to 3 HP, 460 V, 3PH Motor, 12 (44 - 1500) Speeds, 10 1/4 Inch Column, 50 Inch Max distance Base to Spindle, 18-1/2 Inch Min Distance Base to Spindle, 9 Inch Spindle Travel, 67 3/4 X 28 X 6 1/2 Inch Base Dimensions, 4190 lb

  • The power train gears and spline shaft are made of the finest quality, heat treated and ground nickel-chrome steel, giving extra strength and smoothness to high torque loads
  • The spindle is made of the finest case hardened steel for extra strength and wear
  • The spindle is supported by double row taper roller and thrust ball bearings at the nose with trust and radial axis bearings at the top
  • The spindle is built to withstand exceptionally heavy drilling and boring loads and to insure maximum accuracy
  • Push button controls are all reduced to 110 Volt
  • Electrical circuits are located in the built-in control box at the rear of the arm- this keeps the controls dust and humidity free while making them easily accessible for maintenance.
  • Entire frame is made of Mehanite and high tensile strength cast iron to handle the heaviest of jobs
  • Arm raising safety device prevents arm from dropping
  • Counter balanced mechanism for spindle return
  • 12 speeds/3 feed rates make exotic materials easier to drill, bore and tap
  • Centralized control center
  • Automatic tool ejector
  • Independent arm manual clamping system, which locks and unlocks the head and column
  • Built in work light
  • Coolant pump
  • Tool kit
  • Box table
Arm Travel Vertical (in.): 22-7/16
Base Dimensions (in.): 67-3/4 X 28 X 6-1/2
Boring Capacity Cast Iron (in.): 4-3/4
Boring Capacity Steel (in.): 3-3/8
Brand: Jet
Column Diameter (in.): 10-1/4
Coolant Pump Motor: 1/8 HP
Distance Base to Spindle (max/in.): 50
Distance Base to Spindle (min/in.): 18-1/2
Distance Column to Spindle (max/in.): 43-5/16
Distance Column to Spindle (min/in.): 9-5/8
Drilling Capacity Cast Iron (in.): 2-1/4
Drilling Capacity Mild Steel (in.): 1-3/4
Elevating Motor: 1 HP
Height: 89 inch
Length: 74 inch
Max Distance Spindle to Table ( in.): 33-21/32
Model Number: J1100R-4
Motor: 1-1/2 to 3 HP, 460V, 3 Ph
Net Weight: 4190 pound
Number of Spindle speeds: 12 (44 - 1500)
Overall Dimensions: 74 x 34 x 89
Part Number: 320035
Quill Down feed Rates (IPR): 3 (.002, .004, .006)
Quill Travel (in.): 9
Quill Travel w/ Powerfeed engaged (in.): 8-21/32
Spindle Taper: MT-4
T-Slots Number and Size (in.): 3 & 3/4
Table Dimensions (in.): 24-3/4 X 20-1/2 X 16-1/2
Tapping Capacity Cast Iron (in.): 1-1/4
Tapping Capacity Mild Steel (in.): 1
Travel of Head Horizontal (in.): 32-1/4
Web Description: J-1100R-4 4" ARM RADIAL DRILL PRESS 3HP, 460V
Width: 34 inch

2 Year Warranty

All Rights Reserved © Burns Tools 2011