GH-1660ZX Lathe with ACU-RITE 300S DRO

Jet 321388 - GH-1660ZX Lathe with ACU-RITE 300S DRO

Uniquely designed exclusively by JET
ISO 9001 certified manufacturer
3-1/8" bore spindle is supported by two tapered and one ball bearing
Chrome molybdenum headstock gears are hardened, ground and shaved
Universal gearbox allows inch, metric, diametral and module pitch threads, no change gears required
Carriage features one-shot lubrication and Turcite-B on bed sliding surfaces
T-slotted compound slide featuring a four-way tool post
One piece cast iron base absorbs vibration allowing heavier cuts
High quality ANSI Class 50 wear resistant cast iron bed ways are hardened and ground
Removable gap allows up to 23-5/8" diameter work on14", 25-7/8" on 16" , 27-1/2" on 18" and 29-1/2" on 22"
Five position automatic carriage stop increases productivity
Attractive chrome control levers, dials and knobs complete this impressive package
Tolerance test certificate included
10" scroll 3-jaw chuck with top reversing jaws
12" independent 4-jaw chuck
12"face plate (16"models)
16" face plate (18" models)
Four-way tool post
Follow rest
Large capacity steady rest
Fully integrated coolant system
Full length splash guard and coolant retrun
Large easy to use foot brake
Articulating halogen work lamp
Centrally located controls with jog button
Threading dial
Mounting pads and levelers
Spindle sleeve (MT-7 - MT-5)
Dead center
Live center

Brand:	Jet
Carriage Travel (in.):	55
Compound Slide Travel (in.):	5-1/8
Cross Slide Travel (in.):	9
Distance Between Centers (in.):	60
Follow Rest Capacity (in.):	1/2 - 3-1/2
Height:	48 inch
Length:	116.5 inch
Length of Gap (in.):	12-1/4
Max Tool Size (in.):	1 x 1
Model Number:	321388
Motor:	7-1/2 HP, 230/460V, 3 Ph, Prewired 230V
Net Weight:	5825 pound
Number of Inch Threads:	61
Number of Longitudinal and Cross Feed Rates:	12
Number of Metric Threads:	24
Number of Spindle speeds:	12
Part Number:	321388
Prewired:	230V
Range of Cross Feeds (IPR):	.0006 - .0365
Range of Inch Threads (TPI):	1-5/8 - 72
Range of Longitudinal Feeds (IPR):	.0015 - .0913
Range of Metric Threads:	.05 - 20
Range of Spindle Speeds (RPM):	25-1,800
Spindle Bore (in.):	3-1/8
Spindle Mount:	D1-8
Spindle Taper W/ Sleeve:	MT-7(MT-5)
Steady Rest Capacity (in.):	3/8 - 7
Swing over Bed (in.):	16
Swing over Cross Slide (in.):	10
Swing Through Gap (in.):	25-7/8
Tailstock Spindle Travel (in.):	5
Taper in Tailstock Spindle:	MT-4
Width:	40 inch
Width of Bed (in.):	13-3/8

Burns Tools

Contact & Directions