• FastFix Saw Blade Changing System: Blade changes are easier and safer using the FastFix system. When engaged, the power switch and arbor are locked simultaneously. The saw is also locked into a position to facilitate easy arbor bolt removal.
• Plunge Cut Action: Simple depth adjustment allows you to expose only the part of the blade necessary for the cut. The plunge action allows cut placement anywhere on the cut line for straight cuts or cut-outs into material.
• Power: The TS 75 is our most powerful plunge cut saw, providing enough power to slice through the toughest of materials with little concern for swirl or burn marks.
• MMC Electronics: Variable speed allows you to match the speed of the saw to the material. The electronics also maintain a consistent speed under load, improving cut performance and protecting the saw's motor from thermal and current overload.
• Slip Clutch: The slip clutch helps to minimize the risk of a kickback and minimizes wear on the blade, gear case, and motor.
• Riving Knife: Spring-loaded riving knife (splitter) retracts into the housing during plunge cuts. The riving knife keeps the cut kerf open so that the material does not pInch the blade. This reduces the chance of kickback, leaving you in control of the operation.
• Depth Of Cut: At 2 3/4" depth of cut, the TS 75 can power through thick stock with ease.
• Scribe Line = Cut Line: The TS 75 makes the actual cut right on the edge of the scribe line, even on bevel cuts.
• Guide Rail Guidance: When used with Festool guide rails, you have ultimate control over the TS saw for perfectly straight cuts. Add the replaceable splinterguard, and a splinter-free cut is achievable on both sides of the blade.

Includes TS75 Plunge Cut Saw, 75" Guide Rail, Standard Saw Blade, T-LOC Systainer, & MFT/3 Multifunction Table.