Join Our Mailing List!

* required



Email Marketing by VerticalResponse

 Burns Tools BBB Business Review

201 22" Planer, 7.5HP 1PH 230V

Bookmark and Share

Add Item to Your Shopping Cart

Powermatic 1791261 - 201 22" Planer, 7.5HP 1PH 230V

Powermatic orders over $999 ship FREE!
*Free Shipping applies to orders shipped UPS Ground within the Contiguous USA.


This 1,300 lb. heavy-duty cast iron planer offers rock solid rigidity and accurate planing for years to come. The hinged top allows easy access to the rollers and knives. The hood comes standard with a 5" dust port for easy attachment to any dust collection system. The cutterhead is complete with four high speed steel knives and turns at 4,800 rpm producing 19,200 cuts per minute. The anti-kick back fingers and pressure bar are located in close proximity to the cutterhead for an exceptional finish. The well designed infeed and outfeed rollers are fitted with roller bearings for long roller life. The sectional infeed and chip breaker are specially designed to allow multiple boards to be planed at the same time. The adjustable bed roller facilitates both rough and finish planing. The solid steel outfeed roller is machined with small serrations to insure a smooth finish yet provide positive feeding. The two-speed gearbox with machined detents is quickly changed up front when switching from rough to finish work. You may easily raise the massive ribbed cast iron, ground finished table 1 /16 with each turn of the hand wheel. The model 201 is available with a 7-1 /2 horsepower, 3-phase or single-phase motor. This planer is perfect for the small to medium shop with continuous planing requirements.

Burns Power Tools is a Preferred Online Partner and Authorized Service Center for Powermatic.

  • Cast iron 1300 lb construction for solid performance without vibration
  • 2 feed speeds - 20/30 FPM - accommodates rough and fine finish work
  • Segmented infeed roller with sectional chipbreaker allows multiple board planing
  • 4-knife head offers 19200 CPM and widest capacity in its class
  • Roller bearing-mounted feed rollers for long life
  • Adjustable bed rollers allow smooth feeding of rough or finished workpieces
  • Oversized cast iron table travels on 2 large lead screws for heavy duty support
  • Dust collection chute with 5" port
  • Adjustable foot pads
Bed Rollers Adjustable from Front: 2"
Brand: Powermatic
Cuts Per Minute: 19200
Cutterhead Diameter: 3¼ "
Cutterhead Speed: 4800 RPM
Dust Collection Minimum CFM Required: 900 cu.ft/min
Dust Port Diameter: 5 "
Feed Rate: 20 and 30 FPM
Height: 59 inch
Length: 42 inch
Maximum Depth of Cut: 3/16 "
Maximum Planing: 22 "
Maximum Planing Thickness: 9¼ "
Minimum Planing Length: 10 "
Model Number: 201
Motor Phase: 1 Ph
Motor Power: 7½ HP
Motor Voltage: 230 V
Net Weight: 1350 pound
Number of Knives: 4
Number of Speeds: 2
Outfeed Roller Diameter: 3 "
Overall Dimensions: 42 x 49 x 59
Part Number: 1791261
Segmented Infeed Roller Diameter: 3 "
Table Height Adjust Manual: 1 Turn = 1/16"
Table Size: 32 1/4" x 24"
Table Support: 2 column
Tool Supplied: tool kit
Width: 49 inch
All Rights Reserved © Burns Tools 2011