Join Our Mailing List!

* required

*

*




Email Marketing by VerticalResponse

Burns Tools BBB Business Review

OES9138 Oscillating Edge Sander, 3HP, 1PH, 230V

Bookmark and Share

$5486.00
Add Item to Your Shopping Cart

Powermatic 1791282 - OES9138 Oscillating Edge Sander, 3HP, 1PH, 230V

Powermatic orders over $999 ship FREE!
*Free Shipping applies to orders shipped UPS Ground within the Contiguous USA.

The large 11-3/4" x 48" table on the OES9138 oscillating edge sander travels a full 8" in vertical height to accommodate most woodworking pieces. It will also tilt negative 5 and out to positive 45. The cast iron platen is a generous 48" x 9-1/2" and covered with graphite for production sanding, offering super support and cooler running to extend belt life. With 24 oscillations per minute you can use the entire belt face without burning. A 3HP motor powers the belt and runs a large gearbox to provide the oscillating action. The entire head pivots on a massive shaft with two sealed ball bearings for trouble-free performance. Dual dust collection ports keep the work area clean and extend the life of your abrasive belt.
  • 3HP motor with 9" x 138-3/4" abrasive belt handles large workpieces
  • Oscillates 24 cycles per minute for better finish and longer belt life
  • 9-1/2" x 48" platen with graphite pad offers largest work surface in its class
  • Rugged bearing-assisted tensioning device for fast belt changes and quick adjust tracking
  • Pedestal control switch for easy access
  • Large 11-3/4" x 48" front worktable with 8" vertical travel tilts and 45 tilt, includes miter head for angle work
  • Precision balanced 9" diameter drive drum and 4" diameter rubber coated idler pulley for positive drive and rigid tracking
  • Large radius end table has 6" vertical travel and 45 tilt for any angle and working height needed
  • Heavy-duty oscillating gearbox and shaft for long maintenance-free use
  • Hinged guard opens for infinite length sanding
  • Dual dust collection ports keep work area clean and extend abrasive belt life
  • Standard Equipment:
  • Two 4" dust ports
  • Tilting main and end tables
  • Platen with graphite pad
Belt Size (W x L): 9 x 138 3/4 "
Belt Speed: 3542 sfpm
Brand: Powermatic
Drum Diameter: 4 " Outboard, 9 " Drive
Dust Collection Minimum CFM Required: 1100 cu.ft/min
Dust Port Outside Diameter: 4 "
Electrical Controls: Magnetic starter
End Table Size: 18 " radius
End Table Tilt: 40 in, 45 out
Fence (L x H): n.a.
Height: 50 inch
Length: 83 inch
Model Number: OES9138
Motor Phase: 1 Ph
Motor Power: 3 HP
Motor Voltage: 230 V
Net Weight: 800 pound
Oscillations Per Minute: 24
Overall Dimensions: 83 x 32 x 50
Part Number: 1791282
Platen Size: 9 1/2 " x 48 "
Table Size (L x W): 48 x 11 3/4 "
Table Tilt: 5 in, 45 out
Table Working Height: 34 1/2 to 40 3/4 "
Width: 32 inch
All Rights Reserved © Burns Tools 2011