Join Our Mailing List!

* required



Email Marketing by VerticalResponse

 Burns Tools BBB Business Review

14.4v/18v Tough IP Li-ion 4.2Ah Cordless 1/2" Drill/Driver with Dual Voltage Technology

Bookmark and Share

Add Item to Your Shopping Cart

Panasonic EY74A1LS2G - 14.4v/18v Tough IP Li-ion 4.2Ah Cordless 1/2" Drill/Driver with Dual Voltage Technology

Panasonic orders over $150 ship FREE!
*Free Shipping applies to orders shipped UPS Ground within the Contiguous USA.

The Panasonic EY74A1LS2G features a compact, light body built for heavy-duty drilling/driving jobs. It comes with two 18 Volt 4.2Ah High Capacity Batteries, but is dual voltage ready and can be use as an 18V or 14.4V tool! This professional tool is Tough IP56 Rated for water and dust resistance.

Its compact size - only 8" long x 9-13/32" tall x 2-5/16" wide - gets it into tight spaces. The tool can produce 372 in.-lbs. of power so it can take on tough tasks such as drilling up to 1-3/8" holes in wood or ½"-diameter holes in metal. In driving mode, the tool can drive M5 machine screws, ¼"-diameter wood and self-tapping screws easily and repetitively.The tool's beefy four-brush motor puts out power and takes on difficult tasks with much less chance of burning the motor out on jobs users sometimes expect the tool to do.

The variable speed, reversible tool has a two-speed transmission that efficiently converts the motor's power into drilling/driving power. Users will find the 80-600 rpm low speed helpful in deep wood-drilling and -driving jobs, while the 220-1,750 rpm high speed works best in most metal drilling jobs. An electric brake stops chuck spin instantly when the trigger is released. A built-in LED light makes work in dark areas easier and a belt hook keeps the tool close at hand when it's not in use.

The 18-stage clutch lets the user adjust driving force to the job. It adjusts from approximately 4.3 to 39.0 in. lbs. in 2 in. lbs. increments, so driving force matches driving needs without overdriving or stripping fasteners.

At just 4.30 lbs. including battery, the tool's light weight and ergonomic design helps keep the user's wrist in the neutral position. The light weight and tool design work together to cause less fatigue and improve tool control.

  • EY74A1X Drill/Driver
  • (2) 18V 4.2 Ah Li-Ion Batteries
  • Charger
  • Case
Battery 4.2Ah Li-ion
IP 56 Approved Yes
Dual Voltage Technology Yes
Size 8" x 9-13/32" x 2-5/16"
Lightweight 4.30 lbs
High Power 372 in. lbs
Speed/Reversible Low: 80 - 600rpm / High: 200 - 1,750rpm
Clutch Torque 4.3 - 39 in.lbs. (2.0 in.lbs. per stage, total 18 stages)
Charging Time - Usable 65 minutes
Charging Time - Full 80 minutes
Electric Brake Yes
LED Work Light Yes
Max. Drill Diameter Wood: dia.1-7/16"
Metal: dia.1/2"
Max. Screws. Driving Wood Screws: dia.5/16"
Self-Drilling Screws: dia.1/4"
All Rights Reserved © Burns Tools 2011