Join Our Mailing List!

* required

*

*




Email Marketing by VerticalResponse

 Burns Tools BBB Business Review

T18 Set - 18V Li-Ion Cordless Drill Set with LED Light, Right Angle & Eccentric Chucks, 4.2 Ah



Bookmark and Share

$635.00
Add Item to Your Shopping Cart

Festool 564524 - T18 Set - 18V Li-Ion Cordless Drill Set with LED Light, Right Angle & Eccentric Chucks, 4.2 Ah


Get FREE SHIPPING on Festool orders over $150!
*Free Shipping applied to orders shipped UPS Ground within the Contiguous USA. We CANNOT ship outside of the USA.

For a Limited Time: Get a Free T-Shirt with Festool orders over $250! Simply specify your size in the 'Notes' section at checkout

Imagine a drill that does the thinking and beeps when the desired torque setting is reached while driving screws. It also beeps when it is time to charge the battery and when it is overloaded, and automatically senses whether the battery is Nickel or Lithium. Imagine this drill being a multifunction tool that at one minute is running a 1-3/8” auger bit, then chasing a screw around a corner or up against a wall and even to a prescribed depth. Never again lose a favorite clutch setting thanks to the independent switch for drilling and driving modes. Additionally, this drill comes with Brushless motor technology - no wearing parts mean your drill will last longer. All of this and more is built into the new T+3 18V drills from Festool.

Brushless Motor - Brushless motors offer significant advantages over motors with brushes, including higher efficiency and reliability, reduced noise, and longer service life to name a few. This helps Festool's cordless drill outperform other drills that would otherwise be in the same class. Brushless motors are as much as 39% more powerful than an equivalent brushed motor.

FastFix Interchangeable Chucks - Quickly and easily swap between any of the five chucks for the T-Series: the Centrotec chuck, keyless drill chuck, right angle chuck, eccentric chuck and depth stop chuck without any tools. FastFix turns your Festool into something more than a common, everyday drill. Centrotec and keyless drill chucks standard, others optional. This drill may be more expensive, but is five drills in one...how much do you think you would spend on a drill/driver, a right angle drill, a quick-change drill, an offset drill, and a depth-stop driver

FastFix Right Angle Chuck - The right-angle chuck provides a 90° angle to the drill tranmission for tight spaces. This chuck can swivel a full 360 degrees with 16 locking positions. It can also be combined with the Centrotec or Keyless Drill chucks for additional functionality. Or, just stick a 1/4" hex shank bit right into the right angle chuck itself.

FastFix Eccentric Chuck - Well, this chuck may look a little odd, but it may be the solution for your application. Have you ever tried to drive a screw in the corner of a cabinet? That big keyless drill chuck gets in the way and may have caused damage to the adjoining surface. Well, not with the Eccentric Chuck. It's designed to get right up into the corners and prevent marring.

FastFix Keyless Drill Chuck - The keyless drill chuck can be used with drill and driver bits up to 1/2" in diameter. The keyless chuck included with these cordless drills use a ratcheting action to ensure that bits do not slip or work themselves loose. Quickly change to the keyless chuck by depressing the green ring and connecting it to the drill.

FastFix Centrotec Chuck - For lighter weight and a more compact form factor, use the Centrotec chuck with its full array of interchangeable drill, driver bits and accessories. Using the Centrotec chuck saves approximately a half of a pound of weight when compared to a standard keyless chuck. Quickly change between bits by depressing the outer green ring. The Centrotec chuck comes standard with a magnetic bit holder that works well with standard 1/4-inch hex shank bits.

High-Intensity LED Light - The integrated, high-intensity LED light is extremely bright to help you see in dark spaces.

Comfortable Ergonomics - Ergonomics are an important consideration in the design process for Festool power tools. We realize that your cordless drill is probably the tool you use the most. So, why shouldn't it be designed to be comfortable? That means a drill that has a very low weight, feels great in your hand, and can be used right or left handed. Not to mention all of the other small details that incorporate to make them a pleasure to use.

Onboard Bit Stowage - The onboard magnetic bit stowage keeps you from spending your time looking for misplaced driver bits or screws. It's a simple feature, but don't you wish your current drill had it?

Battery Fuel Gauge - The integrated battery fuel gauge let's you know when it's time to swap the battery before it's too late.

Integrated Belt Clip - Sometimes you need to use both of your hands but don't want your drill too far out of reach. The T-Series drills have an integrated belt clip which can be switched to either side of the drill to meet your preference. It can also be completely removed, if necessary.

Lithium Ion Battery Technology - Festool warranties their batteries for three years! Festool cordless drills represent the culmination of the best technology available today, with features unique only to Festool. . Battery cells are carefully tested and selected to find matched sets to enhance cell balancing. This technique ensures equal charge and discharge cycles, thus prolonging battery life and efficiency.

  • T18+3 Cordless Drill
  • 2 Batteries (18V, 4.2 Ah)
  • TCL3 Charger
  • Keyless Drill Chuck
  • Centrotec Quick-Change Chuck
  • Right Angle Chuck
  • Eccentric Chuck
  • Centrotec Starter Set
  • Systainer SYS 2 T-Loc

Motor Type

EC TEC Brushless

Battery Voltage


T 18 - 18.0 v, 3.0 Ah

Screws per Charge*

T 18 - 920

RPM - Setting 1

0 - 450

RPM - Setting 2

0 - 1,500

Keyless Chuck Capacity

1/16" - 1/2"

Max. drill diameter (steel) 5/8"
Max. drill diameter (wood) 1-3/4"
Torque setting range 4.4 - 70.8 in lbs (0.5 - 8 Nm)
Max. torque in steel 398.3 in lbs (45 Nm)
Max. torque in wood 265.5 in lbs (30 Nm)

Weight


T 18 - 3 lbs. 13.7 oz.

Systainer Size

SYS 2 T-Loc

3-Year Warranty

Festool offers a three year limited warranty, one of the longest in the industry. Festool will even cover all shipping costs during the first year of the warranty. Festool warrants that the cordless drill, charger and batteries will be free from defects in materials and workmanship for a term of three years from the date of purchase.

Related Products:

Centrotec 98-Piece Drilling/Driving Installers Set
All Rights Reserved © Burns Tools 2011