A safer, better saw, in so many ways.
The SawStop® Professional Cabinet Saw has several features to help operators stay safe.

• SawStop safety system prevents serious injury with always-on protection.
• 110V, 1.75HP model is engineered for the home shop, as it delivers the convenience of plugging in anywhere and a smaller shop footprint combined with the Professional Cabinet Saw’s safety, quality and dependability.
• Dust Collection Blade Guard (included with the 3.0HP model, optional for the 1.75HP model). This innovative blade guard collects above-table dust and features independent lateral sides to minimize exposure to the blade. It retains a low profile to allow for cuts as narrow as 3/4 of an inch.
• Riving knife minimizes kickback and provides protection during non-through cuts.
  
• We double-check the saw every time you turn it on. A diagnostic self-check runs when you start the saw to ensure all systems are ready to detect an accident. If any problem is detected, the system will not allow the saw to start.
• Sometimes you have your hands full and really need to stop the blade. Our large start/stop paddle with hands-free shutoff can be pushed with your knee allowing you to safely stop the blade even hands free.
• Never worry again about someone using your saw when you’re not around. The main power switch with lockout key prevents unauthorized users from operating the saw.
• When the power goes out, the saw stays off. The safety system won’t allow the motor to restart automatically when the power comes back on.
• Left-tilting blade helps prevent wood from binding against the fence.

• 10” Professional Cabinet Saw
• 30" fence system, rails & extension table.
• Heavy-duty arbor & arbor bearing
• Contact detection & braking system
• Cast-iron table, wings, trunnions and arbor block
• Miter gauge with T-slots
• European-style riving knife
• Micro Blade guard
• Blade shroud dust collection
• Tool Free Zero-clearance insert
• Quality 40 tooth carbide tip blade

SawStop warrants to the original retail purchaser of a new contractor saw from an authorized SawStop distributor that the saw will be free from defects in material and workmanship for ONE YEAR from the date of purchase. SawStop warrants to the original retail purchaser of a refurbished, demonstration or floor model contractor saw from an authorized SawStop distributor that the saw will be free from defects in material and workmanship for SIX MONTHS from the date of purchase.

This warranty does not apply to defects arising from misuse, abuse, negligence, accidents, normal wear-and-tear, unauthorized repair or alteration, or lack of maintenance. This warranty is void if the saw or any portion of the saw is modified without the prior written permission of SawStop, LLC, or if the saw is located or has been operated outside of the country where the authorized SawStop distributor from whom the saw was purchased resides.

Please contact SawStop to take advantage of this warranty. If SawStop determines the saw is defective in material or workmanship, and not due to misuse, abuse, negligence, accidents, normal wear-and-tear, unauthorized repair or alteration, or lack of maintenance, then SawStop will, at its expense, and upon proof of purchase, send replacement parts to the original retail purchaser necessary to cure the defect. Alternatively, SawStop will repair the saw provided it is returned to SawStop, shipping prepaid, with proof of purchase and within the warranty period.

SawStop disclaims any and all other express or implied warranties, including merchantability and fitness for a particular purpose. SawStop shall not be liable for death, injuries to persons or property, or incidental, consequential, contingent or special damages arising from the use of the saw.

This warranty gives you specific legal rights. You may have other rights, which vary from state to state.

It is important to understand that SawStop® saws do not prevent injuries. They work to minimize the severity of injuries. In fact, an injury must occur before the SawStop® safety system reacts. The severity of the injury will depend on the speed at which a person contacts the spinning blade. You may incur a serious injury on a SawStop® saw. If you decide to use the saw in Bypass Mode, the safety system will be disabled and it will not activate in the event you contact the spinning blade.