Powermatic 1791293 OES9138 Sander Oscillating Edge 230/460 V, 3HP
SKU
1791293
$6,599.99
Ships direct from manufacturer?
The large 11 3/4 inch x 48 inch table on the OES9138 oscillating edge sander travels a full 8 inch in vertical height to accommodate most woodworking pieces. It will also tilt negative 5 degree and out to positive 45 degree. The cast iron platen is a generous 48 inch x 9 1/2 inch and covered with graphite for production sanding, offering super support and cooler running to extend belt life. With 24 oscillations per minute you can use the entire belt face without burning. A 3HP motor powers the belt and runs a large gearbox to provide the oscillating action. The entire head pivots on a massive shaft with two sealed ball bearings for trouble-free performance. Dual dust collection ports keep the work area clean and extend the life of your abrasive belt.
WARNING: Proposition 65 Warning for California Residents View Details
| Manufacturer | Jet |
|---|---|
| Condition | New |
| UPC | 66275548557 |
| Features |
|
| Includes | (2) 4 inch Dust Ports, Tilting Main and End Tables, Platen with Graphite Pad |
| PDFs | |
| Horsepower | 3 HP |
| Motor Phase | 3 Ph |
| Stationary type | Horizontal/Vertical Oscillating Edge |
| Belt Speed (FPM) | 3542 FPM |
|---|---|
| Drum Diameter Outboard | 4" |
| Drum Diameter Drive | 9" |
| Platen Size | 9 1/2" x 48" |
| Oscillations Per Minute | 24 OPM |
| Sanding Belt Size (L x W) | 9" x 138 3/4" |
| Main Table Size (L x W) | 48" x 11 3/4" |
| Main Table Tilt Inner | 5 Deg |
| Main Table Tilt Outer | 45 Deg |
| Table Height from Floor | 34 1/2" - 40 3/4" |
| End Table Size | 18" |
| End Table Tilt Inner | 40 Deg |
| End Table Tilt Outer | 45 Deg |
| Electrical Controls | Magnetic Starter |
| Minimum Dust Collection CFM Required (CFM) | 1,100 CFM |
| Dust Port Outside Diameter | 4" |
| Motor Voltage | 230/460 V |
| Prewired Voltage | 230 V |
| Recommended Circuit Size | 15/10 Amps |