Designed for commercial and industrial applications
1/2-ton capacity
Single phase model
20 feet lift
Easy to install, inspect and maintain
Totally enclosed steel plate construction with a durable powder coat finish
Gear train features lifetime lubrication, no oil changes required
Heavy duty ventilated motor with thermal overload protection
Equipped with chain container
Reliable DC electro-magnetic brake holds the load even if power is interrupted
Quick connect wiring for power and push button controls
Upper and lower limit switches prevent over travel
Durable 24 V pushbutton control station with cable strain relief
Proof tested with test certificate
Complies with OSHA, ANSI/ASME B30.16 and HST-1 standards
Solid state starting switch for added reliability
All models equipped with slip clutch design overload protection
Hardened 80 grade chain
Hoist Capacity (Tons)
0.5 Ton
Hoist Max Lift Height (Feet)
20'
Horsepower
1.5 HP
Motor Phase
3 Ph
Warranty
2 Year Warranty
Caution
Be sure that the supporting structures and load attaching devices used in conjuntion with this hoist provide an adequate safety factor to handle the rated load plus the weight of the equipment. If in doubt, consult a qualified structural engineer. This equipment is not to be used for lifting, supporting, or transporting people or lifting or supporting loads over people
Duty Cycle Rating
30 %
Headroom
20 3/16 "
Height
15.35 inch
Hoisting Speed
31.5 fpm
Length
20.87 inch
Load Chain (dia.)
6.3 mm
Model Number
1/2SS-3C-20
Motor Voltage
230 / 460 V
Net Weight
99 pound
Number of Falls
1
Part Number
123200
Web Description
1/2SS-3C-20, 1/2 TON 3PH, 20' LIFT 230V/460V PREWIRED 460V
