Pneumatic Portable Vacuum with Division 1 Immersion Separator for use on metallic surfaces such as aluminum, magnesium, titanium, commercial alloys. Collects maximum of 22 lbs. (10 kg) of dust. Legally certified as explosion-proof and dust ignition-proof. Utilized for the recovery of metallic, conductive and explosive dusts, into a liquid immersion bath such as water, paraffin oil or mineral oil. Renders hazardous dust inert. Recovery capacity of 1.3 gallons (5 liters) of dust into 7.9 gallons (30 liters) of neutralizing liquid.Filter is located downstream of the motor
Stainless steel recovery tank (SAE 304). Easy one-click detaching and connecting of tank. Unit is static-dissipating (kit included) and conductive. Aerosol leak tested for quality assurance. Equipped with easy-glide cart and tool basket. Dynabrade recommends the use of Mineral Oil with viscosity of 10.5 cSt. 96608 Conductive Cleaning Kit available separately
Designed For Use In: Class I, Division I, Groups A, B, C, D T6 Class II, Division I, Groups E, F and G Hazardous locations as defined in the National Electric Code (NFPA 70)
Vacuum for use in: Group A: Atmospheres, containing acetylene, Group B: Atmospheres, containing flammable gas, flammable liquid-produced vapor, or combustible liquid-produced vapor mixed with air, Group C: Atmospheres containing flammable gas, flammable liquid-produced vapor, or combustible liquid-produced vapor mixed with air, Group D: Atmospheres, containing flammable gas, flammable liquid-produced vapor, or combustible liquid-produced vapor mixed with air that may burn or explode, Group E: Atmospheres, containing potentially combustible dusts, including aluminum, magnesium, and their commercial alloys, Group F: Atmospheres, containing combustible carbonaceous dusts, such as coal, carbon black, charcoal, coke dust Group, G: Atmospheres, containing wood and plastic dusts
Includes
Two 20' (6 m) Conductive Coaxial Hoses with Integrated Air Lines
Y-Connector
Two Composite Couplers
Two Vacuum Hose Swivel Adapters
3/4" x 25' (19 mm x 7.6 m) Conductive Air Line Supply
HEPA H14 Filter with 99.995% efficiency on 0.3 micron
Application
Source Capture, GP Clean-Up
Type
Portable Vacuum System
Tank Capacity
7.9 Gallon
Dust Recovery
22 lbs
Collection Category
Division 1
Water Static Lift
180"
Noise Level
80 dB(A)
Air Consumption CFM
45 CFM
Air Flow Rate (CFM)
110 CFM
Tool Air Pressure (PSIG)
90 PSIG
Tank Type
Immersion Separator
Height
72"
Length
36"
Width
34"
Collected Material
Metallic Alloys
Filter Rating
HEPA14
Filtration Media
Wet
Powered By
Pneumatic Venturi
European Certifications
ATEX, Third Party Certified, CE EX II 2 GD c IIC T6 (85 Deg C)
