Pferd 79182991, 1" Crimped Wire End Brush, 10/Box

Designed for light brushing such as deburring, cleaning and derusting.

In order to fulfill the requirements for brushing stainless steel (INOX), Pferd Tools produces all stainless steel (INOX) brushes using 302 stainless steel wire. Practical experience gained from industrial use confirms that this wire quality achieves excellent corrosion resistance with optimum brush life. The wire found in stainless steel (INOX) brushes tends to become magnetic after cold working. All Pferd Tools brush products with stainless steel wire (INOX) are color-coded blue in the Tool Manual. All of these brushes are recommended for use on all stainless steels (INOX), such as 316. The reason for this is a change in the microstructure caused by deformation (e.g. during the wire drawing process). This does not have any impact on the quality and corrosion resistance of the INOX filament. The filament is still resistant to corrosion.

Stainless steel wire (INOX) is temperature-resistant up to 850 °F.

Recommendations for Use

Please observe the recommended rotational speeds.

For best performance, use a power tool with a minimum output of 300 watts.

Safety Notes

When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This especially applies to high rotational speed ranges. The minimum clamping length is 10 mm.