Veto Pro Pac CT-XL 16.5" Extra Large Cargo Tote

Designed to stand up to the rigors of daily use, the Cargo Totes feature 1800 denier body fabric, leather handle grips and Veto’s signature 3mm thick polypropylene waterproof base. Veto Pro Pac’s patent pending design keeps the Cargo Totes standing upright and open at all times for easy access, a feature not seen on other tote products for tool storage.The CT-XL has 40% more cargo storage space than the CT-LC; it offers the ultimate bulk storage capacity for larger tools and accessories such as hammer drills, extension cords, boots, sawzalls, and air hoses.

Zippered Bags : Keep The Zippers Clean & Lubricated

Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate zippers twice a year (more often if work on a job site with a high amount of airborne debris). To clean the coils scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils apply a silicone spray, beeswax or a zipper lubricant.

Zippered Bags : Protect The Zippers From Sharp Objects and/or Excessive Heat

Any sharp object or heat source is capable of permanently damaging the zippers. A zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of tools facing down in bag and away from the zipper coils.

Don’t Overstuff The Bag

Overstuffing tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If we have to work hard to closed zipper(s), tool bag is most likely overstuffed proceed with caution.