TSO Products 61-511 GRS-16PE D 15.2" Parallel Edge Guide Rail Square

The proven design of the GRS-16 guide rail square has now been adapted to fit the DeWalt track saw system! Like the original GRS-16 and GRS-16 PE squares, the GRS-16 PE D makes it lightning fast to achieve dead square cuts with your DeWalt plunge saw. With two reference parallel edges, the GRS-16 PE D permits squaring against the front or back of your workpiece. The square attaches to your DeWalt track with a torpedo nut that automatically squares as it clamps down, resulting in a rock-solid attachment that won't fall out of square over time and will never need calibration. Simply slide the square onto your guide rail, secure the single flat head screw on the bottom of the plate using the included 3mm hex L-wrench (which stows magnetically on the face of the square so you never lose it), and you're ready to get to work. DeWalt's guide rails are uniquely symmetrical and feature splinterguards on both sides of the track. We carefully designed the GRS-16 PE D so that it could be mounted on either side of the guide rail, without interfering with the splinterguards. "Other" tools on the market require you to cut off a portion of your spliterguard to mount the square, limiting where you can place and move the square along the guide rail; not so with the GRS-16 PE D. Much more than just a guide rail square, the GRS-16 PE D is the foundation of a broader system of TSO Products designed for interoperability. In fact, the TSO Parallel Guide System and angle accessory connects to the GRS-16 PE D via its included M6 accessory mounting holes. Once attached, you can repeatedly square and parallel rip with your DeWalt track saw in a single operation.