Jet 722155 JWP-15BHH 15" 230V 3HP Helical Cutterhead Planer
SKU
JT9-722155
$3,739.00
Ships direct from manufacturer?
The new Jet 15" helical head planer quickly and quietly transforms rough lumber into smooth boards. This machine means business with a powerful 3 HP motor with v-belt transmission combined with a helical cutterhead housing 48 staggered carbide quick change knives. The innovative precision air strut system (Pass) provides consistent upward pressure on the cutterhead, reducing the chance of board snipe. The conveniently located two-speed gear box allows for quick and easy feed rate adjustments while removing up to 1/8" material with each pass for a smooth finish. A heavy-duty precision ground cast-iron table and infeed/outfeed tables provides support for larger work pieces, making this planer a beautiful addition to the shop.
WARNING: Proposition 65 Warning for California Residents View Details
| Manufacturer | Jet |
|---|---|
| Condition | New |
| Features |
|
| Type | Planer |
|---|---|
| Cutterhead Speed (RPM) | 5,200 RPM |
| Dust Port Diameter | 4" |
| Motor Amperage | 15 Amps |
| Motor Horsepower | 3 HP |
| Motor Voltage | 230 V |
| Number of Knive | 48 |
| Number of Speed | 2 |
| Style | Floor Standing |
| Cutterhead Type | Helical |
| Motor Phase | 1 Ph |
| Frequency | 60 Hz |
| Full Load Amperage (Listed FLA) | 11 Amp |
| Start Capacitor | 300MFD 125VAC |
| Run Capacitor | 60µF 250VAC |
| Motor Speed (RPM) | 3,450 RPM |
| Cord Power | 14AWG x 3C |
| Sound Emission without Load (from Infeed Table) | 83 dB at 20" |
| Minimum Workpiece Length | 5.6" |
| Feed Rate | 16 and 20 FPM |
| Gearbox Oil Capacity | 420 ml |
| Number of Cutterhead Row | 4 |
| Knife Type | 4-Sided Insert |
| Cuts per Minute | Continuous |
| Main and Extension Table Material | Cast Iron |
| Cabinet and Anti-Kickback Finger Material | Steel |
| Infeed Roller Material | Aluminum Extrusion |
| Outfeed Roller Material | Rubber |
| Recommended Minimum Dust Collector Capacity | 600 CFM |
| Table Length | 15" |
| Table Width | 46.5" |
| Maximum Cutting Thickness | 6" |
| Maximum Cutting Depth/Material Thickness | 3/16" |
| Maximum Cutting Width | 15" |
| Cord Length | 17' |
| Maximum Cutting Full Width and Depth | 1/8" |
| Knife Length | 15" |
| Knife Width | 15" |
| Knife Thickness | 5 mm |
| Cutterhead Diameter | 2.6" |
