Veto Pro Pac MB3B 10" Largest Meter Tool Bag

The MB3B is our largest meter bag with 14" of vertical storage space with capacity for 2-3 meters and tool storage. Includes a padded insert box with divider for added efficiency and flexibility on the job site. Additional padded insert boxes and dividers for padded insert boxes are available for purchase below. This bag works overtime to make service calls quick and efficient.

Keep the Zippers Clean and Lubricated

Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate our zippers twice a year (more often if we work on a job site with a high amount of airborne debris). To clean the coils scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils apply a silicone spray, beeswax or a zipper lubricant.

Protect the Zippers from Sharp Objects and/or Excessive Heat

Any sharp object or heat source is capable of permanently damaging the zippers. A zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of our tools facing down in our bag and away from the zipper coils.

Don’t Overstuff the Bag

Overstuffing our tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If we have to work hard to closed our zipper(s), our tool bag is most likely overstuffed proceed with caution.