Shaper Tools SCFP1-AJ-NN BenchPilot

BenchPilot is like autopilot for Origin: clip Origin into BenchPilot to turn it into a hands-free milling machine, capable of vertical or horizontal cutting. Let BenchPilot drive Origin so you can focus on other tasks at hand. Then simply unclip Origin to use it elsewhere when needed.

Note: Does not include, Origin, Workstation, or the Shelf Upgrade Kit.

Tired of driving Origin around? BenchPilot enables automated, hands-free cutting for Origin (Gen1 and Gen2) so you can focus on other tasks at hand. Clip Origin into BenchPilot and let it drive Origin from point A to point B, while Origin continues to handle the small precision movements. Think of it like autopilot for Origin.

Dimensioned and sized to fit perfectly with Shaper Workstation, BenchPilot creates a gantry-like system with horizontal and vertical milling capabilities – flexible for cutting joinery, inlays, intricate engravings, or profiles. It can also be mounted without Workstation and fit directly to your bench. It’s great for batch work or simply tedious and time-consuming jobs. Best of all, it doesn’t require complicated software, g-code, or other types of CNC programming to operate. If you know how to operate Origin, you’ll know how to operate BenchPilot.

Variable Feed Rate Control: Adjust the feed rate on the fly with real time control.

BenchPilot is capable of driving Origin from 1 to 45 inches per minute. With the adjustable feed rate control you can dial in the settings to achieve the best results. As you change feed rate, Origin’s onscreen cut operation estimate updates in real time

This CNC is Easy: Clip Origin into BenchPilot, then click the Pilot button to begin operation. Design directly on Origin or import designs from your favorite software.

Drives Origin Automatically: BenchPilot moves Origin across your workspace with a belt drive system.

Dedicated E-stop: Emergency stop, if and when you need it.

Clip in one minute, Unclip the next

Can your CNC do this? With BenchPilot, Origin is the only CNC machine that can be instantly converted from a benchtop gantry system to a fully portable handheld CNC the next minute.

Go Horizontal. Go Vertical

With Workstation’s vertical Clamping Face, BenchPilot is capable of cutting “on end,” an operation most CNC machines don’t support.

And, using the Shelf Upgrade Kit, it’s easy to profile large parts, horizontally.

We’re Serious, It’s dead simple

Once Origin is connected to BenchPilot, set up the project like you would normally with Origin, then click Pilot to begin cutting.

Design directly on tool, Begin cutting in minutes, Interrupt a cut if needed, Resume cutting easily.

Toolpath Pocketing

When BenchPilot approaches a pocket to clear out, it will automatically determine the best path to remove material efficiently.

BenchPilot Parts: BenchPilot ships with some assembly required. We’ll walk you through the process with detailed instructions.

Right- and Left-Side Arm: Motor housings, linear motion, and feed rate control.

Base Frame: Custom aluminum t-track frame mounts to Shaper Workstation.

Origin Harness: Mounts on Origin with quick-release attachment for BenchPilot.

Crossbar: Connects BenchPilot to the Origin harness for X/Y motion control.

E-Stop: Instantly cuts power to BenchPilot and Origin when, and if, you need it.

Power Brick: AC/DC power supply for BenchPilot and Origin.

Feet: Help keep BenchPilot stable when clamped to your workbench.