The TA-WB waist tool apron adjusts for different waist sizes and functions as a simple waist tool carrying belt for light duty or bench work. The TA-WB waist tool apron adjusts for different waist sizes and functions as a simple waist tool carrying belt for light duty or bench work.
WARNING: Proposition 65 Warning for California Residents View Details
Keep the Zippers Clean & Lubricated: Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant
Protect the Zippers From Sharp Objects and/or Excessive Heat: Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils
Don’t Overstuff the Bag: Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate
