Veto Pro Pac TECH-PAC 13" Backpack Tool Bag

Designed to enable the safe and comfortable transport of a variety of tools when servicing equipment accessible by extension or cage ladders, or in cities or industrial buildings where walking long distances is required, the Tech Pac features Veto Pro Pac’s patented center panel, heavy duty construction and stabilizing injection molded waterproof base that keeps tools dry, even in the nastiest of conditions. With 46 pockets inside and out, the Tech Pac has ample room for hand tools, meters, parts boxes, cordless drills and impact drivers, as well as other bulkier items such as manifold gauges, hoses, cable wires and even a tablet. The backpack features an innovative quick release handle that allows easy access to the larger tool bay compartment and reduces the strain on the shoulder straps unlike any other backpack bag. The Tech Pac’s patented center panel design offers dual bays with two tool storage platforms in each bay. The center panel design with the main tool and meter storage options on each side centers and stabilizes the backpack. The Tech Pac, either when closed and ready for transportation, or opened for quick and easy access, is uniquely designed not to tip over unlike most backpack bags. It also includes D-rings, bit extension and memory stick pockets, stainless steel tape clip and a 7" X 10" pocket for a tablet or laptop; fits small laptop or most tablets. The TECH PAC is also made for comfort with a thermo-formed EVA padded back panel that helps cushion the load (which also provides structural stability), a padded load displacing shoulder strap system with multiple adjustment strap points and an ergonomic TPV rubber grip. “The most difficult assignments for tradesmen are those where you need to climb a ladder or haul tools over long distances. You need to be able to carry all the tools you are going to need safely and comfortably,”. “We wanted to see first hand how tradesmen in the field deal with those conditions, so i spent weeks with them on the job observing them – from looking at OSHA standards of three points of contact on ladders, hauling tools up with a rope, to the need for a backpack that would fit through cages and stand up when being used, to a backpack that is comfortable and won’t get wet when placed down in wet or muddy conditions. This product is the result of those observations and the resolution to those challenges.”

Keep The Zippers Clean & Lubricated

Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate zippers twice a year (more often if work on a job site with a high amount of airborne debris). To clean the coils scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils apply a silicone spray, beeswax or a zipper lubricant.

Protect The Zippers From Sharp Objects and/or Excessive Heat

Any sharp object or heat source is capable of permanently damaging the zippers. A zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of tools facing down in bag and away from the zipper coils.

Don’t Overstuff The Bag

Overstuffing tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If we have to work hard to closed zipper(s), tool bag is most likely overstuffed proceed with caution.