Husqvarna 542751360 16" Vari-Cut Wet/Dry Segmented Diamond Saw Blade
SKU
542751360
$194.25
Ships direct from manufacturer?
Our 'Easy-fit' system allows the expansion of the bore hole from 20.0 to 25.4 mm. This enables us to mount the blade on different types of machines (power cutter, table saw, floor saw). Applies to blade diameters up to 350 mm. The design of the segment provides a reduced contact surface in the concrete. This gives a quick start in a controlled manner, when applying a new blade. Good Balance Between Performance and Cost: This diamond tool has a good performance/price ratio thanks to the high performance output in relation to the tool investment. Developed for fast cutting in (reinforced) concrete, bricks and blocks. It allows us to cut a very wide range of materials with no need to change blades.
WARNING: Proposition 65 Warning for California Residents View Details
| Manufacturer | Husqvarna |
|---|---|
| Condition | New |
| UPC | 80554474336 |
| PDFs | |
| Application | Reinforced Concrete, Concrete, Brick, Roof Tile, Cured Concrete Hard, Cured Concrete Medium, Cured Concrete Soft, Concrete Hard, Concrete Medium, Concrete Soft, Flint Concrete Hard, Granite, Marble, Natural Stone, Block, Abrasive, Iron, Ductile Iron, Cera |
| Arbor Size | 3/4" |
| Blade Diameter | 16" |
| Diamond Type | Vari-Cut |
| Sanding Type | Wet / Dry |
|---|---|
| Blade Type | Saw Blade |
| Configuration | Segmented |
| Segment Length | 1.57" |
| Segment Width | 0.13" |
| Segment Height | 0.400" |
| Maximum Power Range | 20 HP |
| Minimum Power Range | 112 HP |
| Suitable for Use With | K 2500, FS 413, K 3000 Wet, K 760, K 760 with OilGuard, K 3000 Cut-in-Break, K 3000 Vac, K 40, FS 309, MS 360, MS 360G |