Pferd 20100 4-1/2" Alumaster HSD-R High Speed Disc

The innovative Alumaster High Speed Disc is a unique product with an extremely high stock removal rate. It is ideal for processing aluminium as it does not generate hazardous or explosive dust. It consists of specially developed tungsten carbide cutting inserts, which are fixed to the High Speed Disc. Special disc for processing aluminum alloys using an angle grinder. Also designed for peripheral milling and milling out root welds.

The Alumaster has been designed primarily for use on aluminum, wrought aluminum alloys, and cast aluminum. It can also machine non-ferrous metals that have a relatively low strength, and it can machine fiber-reinforced plastics. Check this for the specific application on a case-by-case basis. Do not push the disc deep into a workpiece. The milling disc is not a cutting tool. Do not exert unnecessarily high forces on the angle grinder. The Alumaster High Speed Disc already works with low forces. When machining workpiece edges, cut along the edge, never across the edge. Do not decelerate the disc while it is touching the workpiece. The cutting inserts may break.

Safety Notes: The flange nut must be tightened with the appropriate tool, such as a face pin wrench. Clamping systems which are designed to be tightened without the use of an additional tool, i.e. which are tightened by hand, should not be used. Tighten the mounting bolts of the cutting inserts using a torque spanner with a tightening torque of 4 Nm. The part number for the 4 Nm torque spanner is 20135. Loose cutting inserts may break during use. Regularly check to make sure they are attached securely. Do not use damaged cutting inserts, they may break.

PFERDEFFICIENCY: Recommends the Alumaster High Speed Discs for working for long periods with low levels of fatigue, whilst saving resources and achieving perfect results as quickly as possible

PFERDERGONOMICS: Recommends the Alumaster High Speed Discs as an innovative tool solution for processing aluminium as they do not generate hazardous or explosive dust.