Amana Tool Corp. 61336-PAD-6, 6" Sander Pad for In-Sand #61336

To be used with Amana #61335 In-sand Dynamically Balanced Non-Random Orbital CNC Sander with 3.5mm Orbital Stroke and 3/4" Shank .

saw blade guidelines for safetyWarning! The max RPM for the 61335 Dynamically Balanced non Random Orbital Sander is 8,000. Working with higher rotation speed can cause damage to the machine spindle.

Please Note: After one hour of sanding, stop and turn the power off on your CNC machine. Inspect to ensure the tool spins freely. Repeat after each hour of sanding.

Designed for CNC Sanding: Wood and Resin.

Consistent Surface Quality: Delivers uniform sanding results and smooth, repeatable finishes directly from your CNC.

Hands-Free Operation: Eliminates much of the manual sanding to remove tool marks, saving time while imProving surface prep.

Efficient Dust Collection: Connects to your CNC’s dust collection system, reducing airborne dust and exposure.

Minimal Material Handling: Surfacing, milling, and sanding in one setup for faster, more accurate results.

Finish-Ready Prep: Leaves a clean, even surface ready for final sanding with a random-orbit sander.

Understanding the Sander Before Use:.

The In-sand is a non-random orbital sander, which operates in a fixed, predictable motion. It is designed for CNC sanding wood and resin.

The sander should Not be used to flatten uneven surfaces, the surface must already be flat before sanding.

The sander is dynamically balanced from the factory using the counterbalance screw as the balancing element.

saw blade guidelines for safety Do Not Adjust Screw Please ensure the red mark is aligned on screw head to tool body.

If the red mark on counterbalance screw is Not aligned Properly to the red mark on the tool body, please email our technical support team for assistance at [email protected].

saw blade guidelines for safety.

NotE: After one hour of sanding, stop and turn the power off on your CNC machine. Inspect to ensure the tool spins freely and the sanding pad is in good condition. Repeat after each hour of sanding.

Heavy Duty Spring, Pre-Installed.

Your sander is designed as heavy-duty tool built for demanding machines and applications. Each unit is equipped with a single spring system, allowing you to control sanding intensity by adjusting the Z-axis pressure. Apply more pressure for rough sanding or lighten the pressure for finer finishing, giving you full control over surface quality and material removal.