Sawing of steel and gray cast iron water pipes up to a wall thickness of 7/8"
Cutting of gray cast iron water pipes up to a wall thickness of 9/16"
Motor drive parts in stainless construction. The pneumatic motor’s vents are resistant to swelling
Operation in low water possible after test
The optionally available guide chain guarantees straight cuts without offset
Simple setup/shortened side plates ensure less space is required around the machine In addition, weight optimization means that only two persons are required to set up the machine
Horizontal and vertical dividing without extra investment
The feed movement can be switched on and off
Tool works independently
Compressed-air drive
Feed cut-off
Cutting depth scale
Includes
Shipping Container
4 x Handles
Chain Tensioner
Metal Tool Case
Crank Handle
10 x Riving Knives
20 x Bolts
40 x Circlips
10 x Chain Segments (length 1-1/4")
Wrench Set
Can Oil
Maintenance Unit with Hose
2 x Transport Belts
4 x Chain Spacers
Video
Electric Brake
No
Variable speed
No
Type
Pipe Milling Cutter Machine
Operating Pressure (PSI)
87 PSI
Air Consumption (CFM)
151.9 CFM
Power Output (Watt)
2,000 W
Motor No-Load Speed (RPM)
6,000 RPM
Tool No-Load Speed (RPM)
70 RPM
Advance
3.15"
Weight
149.91 lbs
Application
Pipe Cutting Up to Diameter 59", Temperature Range Permanently Below 0 degree C, Sawing of Steel Pipes with a Wall Thickness Up to 1-3/4", Sawing of Cast Pipes Up to a Wall Thickness of 7/8", Cutting of Steel Pipes Up to a Wall Thickness of 1-3/16", Cutting of Cast Pipes with a Wall Thickness Up to 9-16", Vertical Cuts, Use in Wet Areas
