SawStop ICS73230-ATGI36, 7HP 3Ph 230 36" TGA Industrial Cabinet Saw
The SawStop Industrial Cabinet Saw is the definition of industrial grade. It is the heaviest, most powerful and highest quality 10″ cabinet saw available. The 7.5HP, 3ph, 230v configuration with a 36″ Industrial T-Glide Advance Fence Assembly offers the durability, versatility, and the peace of mind only SawStop’s patented safety system can provide.
36-Inch T-Glide Advance Fence Assembly: The 36-inch T-Glide Advance Fence & Rail are made of heavy-gauge steel for sure lockdown and reliably square cutting for years without deflection. The multi-function aluminum fence face provides the ability to use in three positions, with a dovetailed groove for attaching accessories and jigs.
Strength & Stability: The Industrial Cabinet Saw is almost 700 lbs of iron and steel – built for heavy-duty cycles with maximum stability and precision.
Expansive Table: Larger, heavier tabletop provides an extensive cutting surface.
Dust Collection: 99% dust collection is delivered above the table with the included dust collection blade guard, and below the table with advanced shrouding around the blade. Available Overarm Dust Collection (Model # TSA-ODC, sold separately) routes dust away from the blade and into the 4” port.
Sawstop Patented Safety System: Stops a spinning blade on contact with skin. The blade stops in less than 5 milliseconds, and drops below the table, minimizing a potentially life-altering injury to a mere scratch.
Added Safety: The Industrial Cabinet Saw has an integrated Lock-Out Tag-Out switch that cuts power to the saw ensuring that only authorized operators can operate the saw. As another added feature, interlock switches on the motor access panels prohibit saw operation if any doors are unlatched.
Reliability: The Control Box houses the on-off switch, power paddle, and on-board computer, and constantly checks that all systems are working to reliably keep you safe.
| Manufacturer | SawStop |
|---|---|
| Condition | New |
| Features |
|
| Includes |
|
| Type | Industrial Cabinet Saw |
|---|---|
| 36" Rip Capacity | ICS73230-ATGI36: 36" T-Glide Advance Fence Assembly |
| Overall Saw Dimensions 36 In | 69 1/4" W x 36 1/2" D x 34" H |
| Motor Configuration 5 | ICS73230: 7.5 HP, 3 Phase, 230v, 17.8 A, 60Hz, TEFC |
| Saw Body Footprint | 20" W x 25" D (Cabinet) |
| Cast Iron Table (W/ Extension Wings) | 44" W x 30" D |
| Extension Table 36 In | 24" W x 30" D |
| Cast Iron Table | 24" W x 30" D |
| Extension Wings | 10" W x 30" D Each |
| Assembled Weights - W/ 36 in Fence Systems | 635 lbs. (Approx Weight, Actual Weight Varies by Motor Size) |
| Weights - Table Saw Only | 530 lbs. (Approx Weight, Actual Weight Varies by Motor Size) |
| Blade | 40-Tooth Titanium, 5/8" Arbor |
| Blade Tilt | Left |
| Blade Plate Thickness | 0.078" (2mm) |
| Max. Depth of Cut, Blade at 45º | 2 1/4" |
| Max. Rip, Left of Blade | 12" |
| Blade Diameter | 8" (Requires Dado Brake Cartridge & Insert) |
| Blade Kerf | 5/8" |
| Max. Depth of Cut, Blade at 0º | 62mm Od x 30mm ID |
| Max. Rip, Right of Blade - 36 In | 10 3/4" |
| Dado Diameter | 0.001" Maximum Allowable Runout |
| Arbor Diameter at Blade | 2 V-Ribbed Belts - Arbor B. Static Dissipative |
| Main Bearing Size | 29/32” |
| Table in Front of Blade (Max. Elevation) | 0.001" Maximum Allowable Runout |
| Arbor Runout | 52mm Od x 25mm ID |
| Belts | 10" |
| Dado Max. Width | 0.010" Maximum Gap |
| Arbor Runout | 10" |
| Second Bearing Size | 0.118" (3mm) |
| Table Behind Blade (Max. Elevation) | 3 1/8″ |
| Table Flatness Measured Diagonally | 36" |
| Blade Alignment With Miter Slot | 0.010" Maximum Displacement |
| Alignment Between Splitter and Blade | 0.010" Maximum Difference |
| Miter Slots Center | 11 1/8" Center-to-Center |
| Deviation of Miter Gauge Indexing Stops From Actual | ±0.25º |
| Miter Slots T-Shaped | 3/4" at Top, 1" at Bottom, 3/8" Deep |
| Miter Slots Info | 5 1/2" (Arbor Flange to Center of Right Slot) |
| Dust Collection Port Diameter | 4" |
| Blade Guard | (Dust Collection) Port Diameter 1-1/2" Outside, 1-1/4" Inside |
| Hand Wheels | 8" Diameter, Cast Iron W/ Chrome Handle |
| Dust Collection Blade Guard | Polycarbonate, Extends Only 1-3/16" to Right of Blade |
| Insert | Zero Clearance, Phenolic Core, Melamine Surfaces |
| Riving Knife / Splitter Thickness | 0.090" (2.3 Mm) |
