Here you can really go in-depth With 500 mm (19 11/16 in.) mortising depth and 50 mm (1 15/16 in.) mortising width with each individual cut.
The guide angle can be tilted up to 45 degrees on either side.
It is supplied with 3 guide pieces (3, 5 and 7 mm (1/8, 3/16 and 1/4 in.)) which can be attached to the front end of the guide rail. Wider slots can thus be achieved by making a second cut. The inserted guide piece ensures that the chain does not err into the first cut.
Usage
Guide piece in use.
For cuts at an angle to the edge of the timber: tilt range up to 45° in both directions.
The vertical edge spacing is set exactly by way of a scale.
The slot mortiser can be tilted through 45° in either direction.
WARNING: Proposition 65 Warning for California Residents View Details
