SuperMax SUPMX-913002 25 x 2 Double Drum Sander
Sand two grits in a single pass with a 25×2 Double Drum Sander. Featuring INTELLISAND® Technology and a 5 HP motor, you can significantly reduce the amount of time you spend sanding.
The 25×2 Double Drum Sander features INTELLISAND® Technology that auto-regulates the conveyor based on load, preventing burning, gouging, and damaging stock. The machine comes standard on an open-column base, and features a 5 HP motor.
Sanding Capacity:
Maximum Width (in): 25″
Minimum Length (in): 3-½″
Maximum Thickness (in): 6″
Minimum Thickness (in): 1/32″
Dimensions (H x W x D): 43″ x 46″ x 31″
- Drum (Extruded Aluminum): 5″ x 25″
- Drum Speed: 1740 RPM
- Dust Hood (Steel Hood, Hinged At Back): (2) 4″ Vacuum Ports, Min CFM: 1000 Recommended
- Ball Bearing (1″): 4 sealed and permanently lubricated
- Conveyor Motor: 100 in. -lb. torque, direct drive D.C. motor, ranged variable, 0-15 FPM
- Drive Motor (TEFC): 5 HP, 1 Phase
- Power Requirements: 208-230V, 60Hz; 1 Phase, 30 Amp Service; 3 Phase 20 Amp Service
- Shipping Weight: 475 lbs
- Shipping Dimensions (L x W x H): 50″ x 44-½″ x 44-½″
- Casters Included: No
- Cord & Plug Included: No
| Manufacturer | Laguna |
|---|---|
| Condition | New |
| Features |
|
| Video |
| Type | Double Drum Sander |
|---|---|
| Maximum Sanding Width: | 25" |
| Minimum Sanding Length: | 3-1/2" |
| Maximum Speed (CFM) | 680 CFM |
| Maximum Sanding Thickness: | 6" |
| Minimum Sanding Thickness | 1/32" |
| Dimension (D x W x H) | 43" x 46" x 31" |
| Drum | 5 x 25" Extruded Aluminum |
| Speed (RPM) | 1740 RPM |
| Dust Hood | One (2) 4" Vacuum Port, Min. 1000 CFM Recommended |
| Conveyor Motor | 25" & 37" Models: 100 in. -lb. Torque, Direct Drive D.C Motor, Ranged Variable, 0-15 FPM |
| Ball Bearing | 1" |
| Drive Motor | 5 HP |
| Power Requirements | 208-230 V, 60 HZ; 1 Ph, 30 Amp Service; 3 Ph 20 Amp Service |
