Veto Pro Pac Tech-MCT Blackout 14" Tool Bag

The Tech MCT Blackout is a stealth version of the popular Tech MCT featuring Veto Pro Pac’s proprietary V-SWAP system. Alternative tablet and bulk storage panels are available separately and can be swapped-out enabling tool, gear or job specific storage solutions. The Blackout version also has vinyl coated mesh and regular pocket storage on both flap openings.

Note: This bag comes with the tool and meter panel. We do not have to select any panels for the bag to come with the tool and meter panels though we may purchase additional panels below to offer a variety of configurations.

Keep the Zippers Clean and Lubricated:

Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate our zippers twice a year (more often if we work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant. Protect the Zippers From Sharp Objects and/or Excessive Heat.

Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of our tools facing down in our bag and away from the zipper coils. Don’t Overstuff the Bag.

Overstuffing our tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If we have to work hard to close our zipper(s), our tool bag is most likely overstuffed… proceed with caution!